| TECHNICAL SPECIFICATIONS |
| CAPACITY |
10" dia bore holes to a depth of 605 mtr (2000 ft) |
| PRIME MOVER |
Truck mounted rig with power from truck engine through transfer gear |
| |
box from a separate deck engine |
| WORK METHOD |
Rotation with direct circulation, nucleus destruction with bleeding by water, |
| |
air or foam drilling by drag bit (over burden) Roto percussion with |
| |
DTH hammer |
| MAST |
Box type structure |
| |
Max Capacity - 30 tons ( 66000 lbs )
|
| |
Max height - 9 mtr (29.7 ft) |
| |
Rod handling capacity - 6.1 mtr (20 ft) |
| PULL UP AND PULL DOWN |
By means of twin hydraulic cylinders and wire rope, Reeving Ratio 1:3 |
| MAX PULL UP FORCE |
Max pull up force - 18410 kgs( 40,500 lbs )
|
| |
Max pull up speed - 30.5 mtr/min (100.5 ft/min) |
| |
Max pull down force - 12635 kgs (27800 lbs) |
| |
Max pull down speed – 44.5 mtr/min (147 ft/min) |
| HYDRAULIC SYSTEM |
225 kg / cm2 / (3200 psi) |
| HYDRAULIC OIL COOLER |
90 GPM fin type Cooler fan drive through hydraulic motor |
| ROTARY HEAD |
Rotary head is powered by two hydraulic motors |
| |
Max torque - 606 kg - mtrs(52800 in - lbs) |
| |
Max speed - 0 to 130 rpm |
| JACKS |
Four box type hydraulic jacks |
| WATER INJECTION PUMP |
Triplex reciprocating pump powered by hydraulic motor |
| BREAK OUT WRENCH |
To open the drill joints break out wrench will be provided |
| |
with rope attached |
| COROUSEL ROD CHANGER |
The pivoted corousel rod changer with 6 rods handling capacity |
| |
hydraulic operated swing cylinder arrangement and winch of one ton capacity |
| |
to carry drill rods, casings and hammer tools |
| OPTIONAL ATTACHMENTS |
Welding machine, mud pump, diesel filling pump , skid |
| |
platform with deck engine |
| SUITABLE COMPRESSOR |
1100 cfm /350 psi, 1150 cfm / 300 psi, 900 cfm / 350 psi, 1200cfm / 320 psi |
| SPECIAL ATTACHMENT |
Automatic rod handling arrangement to handle 50 numbers of |
| |
20 ft drill rods with remote control |
| TWO TRUCK ARRANGEMENT |
One for rig unit and second to carry the compressor |
